Filter
Top Products
2-7
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-15903-01
Chapter 2 Preparing to Install the CiscoWorks 1130 Wireless LAN Solution Engine
Safety
Maintaining Safety with Electricity
Follow these guidelines when working on equipment powered by electricity:
• Contact the Cisco Technical Assistance Center if any of the following
conditions occur:
–
The power cable or plug is damaged.
–
An object has fallen into the product.
–
The product has been exposed to water.
–
The product has been dropped or damaged.
–
The product does not operate correctly when you follow the operating
instructions.
• Use the correct external power source. Operate the product only from the type
of power source indicated on the electrical ratings label. If you are not sure
of the type of power source required, consult the Cisco Technical Assistance
Center or a local power company.
• Use only approved power cables. If you have not been provided with a power
cable for your computer or storage system or for any AC-powered option
intended for your system, purchase a power cable that is approved for use in
your country. The power cable must be rated for the product and for the
voltage and current marked on the product’s electrical ratings label. The
voltage and current rating of the cable should be greater than the ratings
marked on the product.
• To help prevent electric shock, plug the WLSE, components, and peripheral
power cables into properly grounded electrical outlets. These cables are
equipped with three-prong plugs to help ensure proper grounding. Do not use
adapter plugs or remove the grounding prong from a cable.
• To help protect your system/components from sudden, transient increases and
decreases in electrical power, use a surge suppressor, line conditioner, or
uninterruptable power supply (UPS).
• Do not modify power cables or plugs. Consult a licensed electrician or your
power company for site modifications. Always follow your local/national
wiring rules.