Filter
Top Products
3-9
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-15903-01
Chapter 3 Installing the CiscoWorks 1130 Wireless LAN Solution Engine
Installing the CiscoWorks 1130 Wireless LAN Solution Engine
Connecting the WLSE to the AC Power Source
Warning
This equipment must be grounded. Never defeat the ground conductor or
operate the equipment in the absence of a suitably installed ground conductor.
Contact the appropriate electrical inspection authority or an electrician if you
are uncertain that suitable grounding is available.
Statement 1024
Connect the AC power receptacle to the AC power source with the provided power
cable.
Connecting Cables
Warning
Do not work on the system or connect or disconnect cables during periods of
lightning activity.
Use unshielded twisted pair (UTP) copper wire Ethernet cable, with standard
RJ-45 compatible plugs, to connect the WLSE to the network.
Step 1 Plug the network connection into the Ethernet port labeled "A." This port
corresponds to the Ethernet 0 interface.
94286