Filter
Top Products
CHAPTER
4-1
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-15903-01
4
Configuring the CiscoWorks 1105 and
1130 WLSE
This chapter describes how to configure the CiscoWorks 1105 and CiscoWorks
1130 WLSEs and how to set up devices for management.
Configuration Quick Reference
Table 4-1 provides a high-level overview of the initial configuration process.
Detailed procedures are provided in this chapter. After configuration is complete,
see the User Guide for the Wireless LAN Solution Engine or the WLSE online help
for information on day-to-day operations.
Table 4-1 Quick Reference
Task Steps References
Configure the WLSE’s
network information.
1. Boot the WLSE and log in at the
system console.
2. Run the setup program.
Configuring the WLSE’s
Network Information,
page 4-3
Configure name
resolution.
If you are not using a DNS server, remove
the name server address from the
configuration
Configuring Name Resolution,
page 4-6
Verify the configuration. While at the system console. verify
configuration.
Verifying the Configuration,
page 4-7