Filter
Top Products
Chapter 14. Network Setup
166
8. Make sure the "ssh" and "xnm-clear-text" system services are enabled.
9. If traffic metering is desired:
a. a. Create an incoming firewall filter and an outgoing firewall filter. These filters should be the
same names as your public security zone name and private security zone name respectively.
The filters should be set to be "interface-specific". For example, here is the configuration
where the public zone is "untrust" and the private zone is "trust":
root@cloud-srx# show firewall
filter trust {
interface-specific;
}
filter untrust {
interface-specific;
}
b. Add the firewall filters to your public interface. For example, a sample configuration output (for
public interface ge-0/0/3.0, public security zone untrust, and private security zone trust) is:
ge-0/0/3 {
unit 0 {
family inet {
filter {
input untrust;
output trust;
}
address 172.25.0.252/16;
}
}
}
10. Make sure all VLANs are brought to the private interface of the SRX.
11. After the CloudPlatform Management Server is installed, log in to the CloudPlatform UI as
administrator.
12. In the left navigation bar, click Infrastructure.
13. In Zones, click View All.
14. Choose the zone you want to work with.
15. Click the Physical Network tab.
16. In the Network Service Providers node of the diagram, click Configure. (You might have to scroll
down to see this.)
17. Click SRX.
18. Click the Add New SRX button (+) and provide the following:
• IP Address: The IP address of the SRX.
• Username: The user name of the account on the SRX that CloudPlatform should use.
• Password: The password of the account.