Filter
Top Products
S row abbreviation/symbol Indicates
A rate of 100 megabits per second, half
duplex mode, and flow control OFF.
A rate of 1 gigabit per second, half
duplex mode, and flow control OFF.
The following table defines the various abbreviations and symbols that appear in the
R row of the port information screen.
Table 1-2. Port Abbreviations and Symbols for R Row
R row abbreviation/symbol Indicates
The port is disabled.
Receive speed is about 10% of line
speed.
Receive speed is about 50% of line
speed.
Receive speed is about 75% of line
speed.
Receive speed is about 100% of line
speed.
Ports
Ports are used to connect the appliance to external devices. NetScaler appliances
support RS232 serial ports, 10/100/1000Base-T copper Ethernet ports, 1-gigabit copper
and fiber 1G SFP ports, and 10-gigabit fiber SFP+ and XFP ports. All NetScaler
appliances have a combination of some or all of these ports. For details on the type
and number of ports available on your appliance, see the section describing that
platform.
Chapter 1 Introduction to the Hardware Platforms
16