Filter
Top Products
Hardware Platforms
The various NetScaler hardware platforms offer a wide range of features,
communication ports, and processing capacities. All the MPX platforms have multicore
processors.
Citrix NetScaler 9010 FIPS
The Citrix NetScaler 9010 Federal Information Processing Standards (FIPS) appliance is a
2U appliance, with 1 single-core processor, and 2 GB of memory.
Note: The NetScaler nCore build is not supported on this hardware platform.
The following figure shows the front panel of the 9010 FIPS appliance with copper
Ethernet ports.
Figure 1-23. Citrix NetScaler 9010 FIPS front panel, with copper Ethernet ports
The following figure shows the front panel of the 9010 FIPS appliance with fiber 1G SFP
ports.
Figure 1-24. Citrix NetScaler 9010 FIPS front panel, with 1G SFP ports
The following components are visible on the front panel of the 9010 appliance:
w
RS232 serial console port.
w
Four ports, numbered 1/1, 1/2, 1/3, and 1/4 from left to right.
Note: The network port numbers on all appliances consist of two numbers separated
by a forward slash. The first number is the port adapter slot number. The second
number is the interface port number. Ports on appliances are numbered sequentially
starting with 1.
The following figure shows the back panel of the 9010 FIPS appliance.
Chapter 1 Introduction to the Hardware Platforms
38