Filter
Top Products
Figure 1-32. Citrix NetScaler MPX 7500/9500 (8x10/100/1000Base-T copper
Ethernet ports), front panel
The following figure shows the front panel of the MPX 7500/9500 (4x1G SFP +
4x10/100/1000Base-T copper Ethernet ports) appliances.
Figure 1-33. Citrix NetScaler MPX 7500/9500 (4x1G SFP + 4x10/100/1000Base-T
copper Ethernet ports), front panel
Depending on the model, the appliance has the following ports:
w
RS232 serial console port.
w
Two 10/100/1000Base-T copper Ethernet management ports, numbered 0/1 and 0/2
from left to right. These ports are used to connect directly to the appliance for
system administration functions.
w
Network Ports
• MPX 7500/9500 (8x10/100/1000Base-T copper Ethernet ports). Eight
10/100/1000Base-T copper Ethernet ports numbered 1/1, 1/2, 1/3, and 1/4 on
the top row from left to right, and 1/5, 1/6, 1/7, and 1/8 on the bottom row
from left to right.
• MPX 7500/9500 (4x1G SFP + 4x10/100/1000Base-T copper Ethernet ports). Four
1-gigabit copper or fiber 1G SFP ports numbered 1/1, 1/2, 1/3, and 1/4 on the
top row from left to right, and four 10/100/1000BASE-T copper Ethernet ports
(RJ45) numbered 1/5, 1/6, 1/7, and 1/8 on the bottom row from left to right.
The following figure shows the back panel of the MPX 7500/9500 appliance.
Figure 1-34. Citrix NetScaler MPX 7500/9500, back panel
Chapter 1 Introduction to the Hardware Platforms
44