Filter
Top Products
Figure 1-51. Citrix NetScaler MPX 17550/19550/20550/21550 appliance, back panel
The following components are visible on the back panel of the MPX
17550/19550/20550/21550 appliance:
w
160 GB removable solid-state drive that is used to store the NetScaler software.
w
USB port (reserved for a future release).
w
Power switch, which turns off power to the appliance, just as if you were to unplug
the power supply. Press the switch for five seconds to turn off the power.
w
Non-maskable interrupt (NMI) button that is used at the request of Technical
Support and produces a core dump on the NetScaler. You must use a pen, pencil, or
other pointed object to press this red button, which is recessed to prevent
unintentional activation.
w
Two removable hard-disk drives that store user data.
w
Disable alarm button. This button is functional only when the appliance has two
power supplies.
Press this button to stop the power alarm from sounding when you have plugged the
appliance into only one power outlet or when one power supply is malfunctioning
and you want to continue operating the appliance until it is repaired.
w
Dual power supplies, each rated at 850 watts, 110-220 volts.
Citrix NetScaler MPX 22040, MPX 22060, MPX 22080,
MPX 22100, and MPX 22120
The Citrix NetScaler MPX 22040/22060/22080/22100/22120 are 2U appliances. Each
model has two 8-core processors, and 256 gigabytes (GB) of memory. The MPX
22040/22060/22080/22100/22120 appliances are available in two port configurations:
w
Twelve 1G SFP ports and twenty-four 10G SFP+ ports (12x1G SFP + 24x10G SFP+)
w
Twenty-four 10G SFP+ ports (24x10G SFP+)
The following figure shows the front panel of the MPX
22040/22060/22080/22100/22120 (12x1G SFP + 24x10G SFP+) appliance.
Citrix NetScaler Hardware Installation and Setup Guide
57