Filter
Top Products
w
256 GB removable solid-state drive, which is used to store the NetScaler software
and the user data.
w
Power switch, which turns off power to the appliance, just as if you were to unplug
the power supply. Press the switch for five seconds to turn off the power.
w
USB port (reserved for a future release).
w
Non-maskable interrupt (NMI) button, which is used at the request of Technical
Support to produce a NetScaler core dump. You must use a pen, pencil, or other
pointed object to press this red button, which is recessed to prevent unintentional
activation.
w
Disable alarm button, which is nonfunctional. This button is functional only if you
install a second power supply.
Press this button to stop the power alarm from sounding when you have plugged the
appliance into only one power outlet or when one power supply is malfunctioning
and you want to continue operating the appliance until it is repaired.
w
Single power supply, rated at 450 watts, 110-220 volts.
Citrix NetScaler MPX 9700, MPX 10500, MPX 12500,
and MPX 15500
The Citrix NetScaler MPX 9700/10500/12500/15500 are 2U appliances, each with 2
quad-core processors, and 16 gigabytes (GB) of memory. All these appliances are also
available in a 10G model and a FIPS model.
The following figure shows the front panel of the MPX 9700/10500/12500/15500.
Figure 1-38. Citrix NetScaler MPX 9700/10500/12500/15500, front panel
The following figure shows the front panel of the MPX 9700/10500/12500/15500 10G.
Citrix NetScaler Hardware Installation and Setup Guide
47