Filter
Top Products
2-10
Setup and Configuration
Writer: Caroline Juszczak Project: Compaq Integrated Remote Console User Guide Comments: 281862-00x
File Name: C-CH02.DOC Last Saved On: 11/20/98 12:54 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
■ Modem result code options
Chapter 6 explains modem command strings in more detail. Chapter 8
provides additional information on using the modem in shared mode.
Appendix A contains suggested entries for proper initialization strings for
several common modems.
2. Set Dial Prefix to either ATDT (tone - default) or ATDP (pulse)
dialing.
3. The Answer String should contain the command string necessary to
place the modem in “auto-answer” mode. It will not accept calls if this
string is not set appropriately.
The default string, ATS0=1 places a Hayes-compatible modem in auto-
answer mode, answering on the first ring.
Assigning Authorized Users
Before any users can log into IRC, the system administrator must set up a valid
user database. This is also performed through the System Configuration Utility.
Figure 2-6. Example: Configuring users