Filter
Top Products
3-14
Establishing a Connection
Writer: Caroline Juszczak Project: Compaq Integrated Remote Console User Guide Comments: 281862-00x
File Name: D-CH03.DOC Last Saved On: 11/20/98 12:55 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Invoke Integrated Remote Console Login
After HyperTerminal establishes a connection, press Enter three times. This
indicates that the incoming call is intended for Integrated Remote Console.
IMPORTANT:
After connection has been established, you have 10 seconds
to press
Enter
three times to validate the call. Pressing any other key
combination or pressing the correct key combination after the 10-second
interval will cause the call to be forwarded to the OS and will not invoke
Integrated Remote Console. If this occurs and modem sharing is enabled, IRC
is unavailable for at least 60 seconds following the failed login attempt. Wait
60 seconds and try again.
After the login is successfully invoked, see the section “Login” later in this
chapter.
Saving a Connection
After verifying the connection information, select File Save so that future
Remote Console sessions can be invoked by selecting File Open, or by
simply clicking the saved name.ht file from Windows Explorer.