Filter
Top Products
4-6
Using Integrated Remote Console
Writer: Caroline Juszczak Project: Compaq Integrated Remote Console User Guide Comments: 281862-00x
File Name: E-CH04.DOC Last Saved On: 12/21/98 10:32 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Table 4-1
Key Functions for Navigating the IRC Menu System
Key Function
1-9 Moves and selects the corresponding menu item
↑ or I Scrolls the highlighted selection up. The “I” key can be used to
navigate the menus from ANSI terminal programs that do not support
the up and down arrow keys.
↓ or M Scrolls the highlighted selection down. The “M” key can be used to
navigate the menus from ANSI terminal programs that do not support
the up and down arrow keys.
Tab
Moves to the next selection.
[Atn] Esc
Exits the Remote Console session. This is a two-key sequence
performed by first pressing the user-definable attention key and then
pressing the Esc key. See Chapter 5 for more information on entering
attention key sequences.
Enter
Displays the next level menu, detail information for a selected item, or
terminates editing and accepts changes.
Esc
Cancels the current event and returns to the previous screen. A
confirmation message is displayed to verify that you have saved any
changes.
Page Up or O Displays the previous page.
Page Down or ,
(comma)
Displays the next page.
Space
Toggles between two options.
Home or U Returns to the top.
End or N Moves to the bottom.
If your terminal emulator does not support the arrow keys, you can still
generate these keys by using attention key sequences (described in detail in
Chapter 5). The attention key sequence for generating the up and down arrow
keys in Remote Console mode is [Atn]I and [Atn]M respectively. For this
example, the attention key method is used to move the selector to the “MS-
DOS” entry.