5-4
Using Attention Key Sequences
Writer: Caroline Juszczak Project: Compaq Integrated Remote Console User Guide Comments: 281862-002
File Name: F-CH05.DOC Last Saved On: 11/20/98 12:56 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Attention Key Support Sequences
Continued
Key Key it is equal to on the server console
[Atn] , (comma)
Page Down
[Atn] U Home
[Atn] N End
[Atn] [Atn]
Generates a literal Atn sequence to the server console.
For instance, if the attention key was assigned to Ctrl +
A, but an actual Ctrl + A was required as input to the
server console, the user could insert a literal Ctrl + A by
pressing this sequence twice.
Example: Pressing F10 Key
For example, if you wanted to press the F10 key on the managed server:
1. Enter the attention key. In this example the attention key is set to its
default: Ctrl+A. Press both the Ctrl and the A keys down
simultaneously. Release both keys, making sure to release the Ctrl key
last.
2. Enter the command to type an F10 at the server’s keyboard. This
command key is 0 (zero).
Step 1 signals IRC that a special key sequence is to follow. Pressing 0 (zero) in
step 2 generates an F10 on the managed server.