Compaq AP200 Personal Computer User Manual


 
5-1
Compaq Professional Workstation AP200 Reference Guide
Writer: IM Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: F-CH05.DOC Last Saved On: 12/14/98 3:26 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Chapter 5
Network Communications
This chapter provides information about networks and the hardware connectors
and software device drivers that allow you to access a network. Once your
network connection is active, you can share resources such as a printer,
exchange information from device to device, and run common software
programs.
NOTE: For more information on networking, refer to the
Software Installation
Guide.
Your workstation comes Ethernet network ready, which means that it has a
preinstalled network controller and preinstalled network drivers. The Compaq
NC3121 Fast Ethernet Network Interface Controller (10/100 Mb/s Auto-
sensing Ethernet controller) PCI card with Wake-on-LAN is a PCI bus
mastering, dual speed 10BaseT, and 100BaseTX controller that will
automatically detect network connection speed and adjust accordingly.
NOTE: Your workstation is also Token Ring Network capable. To connect to a
Token Ring Network, you must install a Token Ring board.