2-6
Software
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: C-CH02.DOC Last Saved On: 12/15/98 4:21 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Table 2-1
Computer Setup
Task Computer Setup Selection
View the product name, processor
type/speed/stepping, CPU serial number,
system ROM date, system board revision,
installed memory size, and asset tracking
number
Select
File,
then select
System
Information.
Set the system time and date
Select
File,
then select
Set Time and
Date.
View the currently installed drive A:
(preinstalled diskette drive) and drive B:
devices and set resources for diskette drives
Select
Storage,
then select
Diskette
Drives.
Enable/disable diskette booting and diskette
writing
NOTE:
After saving changes to Removable
Media, the workstation will restart. Turn the
workstation off, then on, manually.
Select
Storage,
then select
Removable
Media.
View information regarding IDE devices
connected to the system
NOTE:
ATAPI devices (CD-ROM, tape) are
listed as ATAPI devices.
Select
Storage,
then select
IDE Devices.
Allows you to set hard drive to Ultra-DMA
(Ultra-ATA), EDMA, or PIO mode operation.
Select
Storage
for the IDE Drive Timing.
Enables/disables IDE drive translation Select
Storage
for the IDE Drive
Translation.
Specify the boot order of installed peripheral
devices (such as LS-120 drive, diskette drive,
hard drive, SCSI, or CD-ROM devices)
Select
Storage,
then select
Boot Order.
Set the energy saver mode to Advanced,
Disabled, or Minimal
Select
Power,
then select
Energy Saver.
Continued