4-6
Hardware Upgrades
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: E-CH04.DOC Last Saved On: 1/19/99 9:40 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Removing the Front Bezel
1. Turn off the workstation and any external devices. Disconnect the power
cord from the grounded AC outlet and the network cable from the
system.
2. Remove the workstation access panel.
3. Push in on the two release tabs 1, then rotate the front bezel away from
the chassis to release it 2.
2
2
1
Figure 4-2. Removing the front bezel
NOTE: When replacing the front bezel, ensure that the bottom hinge points
are properly placed in the chassis before rotating the front bezel back into its
original position.