Filter
Top Products
6-1
Compaq Professional Workstation AP200 Reference Guide
Writer: IM Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: G-CH06.DOC Last Saved On: 12/15/98 4:26 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Chapter 6
Troubleshooting
This guide provides information on how to identify and correct some
common disk, display, memory, and software problems. It also identifies
and explains some common messages you may receive on the screen,
including specific error messages that may display during the Power-On
Self-Test (POST) at startup.
You will not see these POST error messages if your workstation is
configured for the Clean Boot mode.
Clean Boot is a fast boot process that suppresses most system messages
during POST, such as memory count and non-error text messages. If a
POST error occurs, the screen will display the error message. To
manually switch to Descriptive mode during POST, press any key
(except F10 or F12). The default boot mode is Clean Boot.
Descriptive Boot shows all system messages during POST and takes
longer to complete. To see the system messages every time you restart
your workstation, reconfigure your workstation to the Descriptive Boot
mode using Computer Setup.
NOTE: For more information on Computer Setup, see Chapter 2,
“Software.”