Filter
Top Products
3-4
Intelligent Manageability
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: D-CH03.DOC Last Saved On: 1/19/99 9:39 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
To install Compaq Diagnostics for Windows NT, refer to the Software
Installation Guide.
Using Compaq Diagnostics for
Windows NT
1. Select the Compaq Diagnostics for Windows NT icon or the Compaq
Diagnostics icon, located in the Control Panel.
The screen displays an overview of the workstation hardware and
software.
2. For specific hardware and software information, select a category from
the Categories menu or from the toolbar.
NOTE: As you move your cursor over the toolbar icons, the corresponding
category names appear near the cursor.
3. To display more detailed information in a selected category, click More
in the Information Level box.
NOTE: Categories or items of information displayed by Compaq Diagnostics
for Windows NT are similar to, but may vary slightly from, the information
presented in View System Information (INSPECT).
4. Review and print this information and, if necessary, discuss it with your
authorized Compaq Reseller or Service Provider.
NOTE: To print the information, click File, then select
Print
. Select one of the
following options:
Detailed Report (All Categories), Summary Report (All
Categories), or Current Category
. Click
OK
to print the report you selected.
5. To exit Compaq Diagnostics for Windows NT, click File, then click
Exit.