Filter
Top Products
Apr 02
Compuprint PageMaster 402N User Guide 2-13
Loading Print Media
4. Open the flap of each envelope and place the envelopes in a neat and aligned stack that does
not exceed 10 envelopes.
5. Position the envelope stack so the surface to be printed faces up and the flaps are open.
6. Load the stack of envelopes into the front tray by sliding the stack between the paper guides
and then pushing the envelope stack into the tray until it will not go any further.
7. Slide the paper guide up against the stack of envelopes.
8. Check the envelope stack to make sure it is not loaded at an angle and that the guides barely
touch the stack.
CAUTION: Do not press the guides tightly against
the stack; the guides should just barely touch the
stack of paper. Paper guides that are too tight can
cause feed jams.