Filter
Top Products
Understanding the System Menus |
107
❚
Admin Settings > System Settings > Output Settings >
Letterhead 2 Sided
Specifies whether to enable the Letterhead 2 Sided feature, which prints on both sides
when using letterhead.
❚
Admin Settings > System Settings > Output Settings >
A4<>Letter Switch
Specifies whether to enable the A4<>Letter Switch feature. This feature prints A4 size
jobs on Letter size paper if A4 size paper is not available or to print Letter size jobs on A4
size paper if Letter size paper is not available.
❚
Admin Settings > System Settings > Output Settings >
A5<>Statement Switch
Specifies whether to enable the A5<>Statement Switch feature. This feature prints A5
size jobs on Statement size paper if A5 size paper is not available or to print Statement
size jobs on A5 size paper if Statement size paper is not available.
❚
Admin Settings > System Settings > Output Settings >
Report 2 Sided Print
Specifies whether to print reports on one side or both sides of a sheet of print media.
❚
Admin Settings > System Settings > Output Settings >
Use Another Tray
Specifies whether to enable the Use Another Tray feature, which changes to another
paper tray when paper runs out in the specified paper tray.
NOTE:
• The size of image to print is not adjusted automatically. If you select another paper tray with paper
size smaller than the paper size specified in the job, the parts that are larger than the print media
are not printed.
❚
Admin Settings > System Settings > Output Settings >
Resume Printing After Jam Recovery
Specifies whether to enable the Resume Printing After Jam Recovery feature. This
feature deletes print job after recovering from paper jam.
❚
Admin Settings > System Settings >
Set Available Time
Sets the available time for the copy, scan, fax, and print functions.
NOTE:
• Set Available Time can be configured when Print, Copy, Scan, or Fax is set to On.
Copy/Scan/Fax/Print Set Available Time Specifies whether to set the time when function is
available.
Start Time
End Time
Recurrence Sets the day of the week to repeat the setting.