Filter
Top Products
300
| Using the Address Book and Phone Book
Starting Dell Printer Configuration Web Tool
To start Dell Printer Configuration Web Tool, enter the IP address of the printer in the
address bar of a web browser.
If you do not know the IP address of the printer, verify the IP address by using the
operator panel, printing the system settings report, or using the ping command. See
"Verifying the IP Settings."
Setting Authentication Type
1 Click Print Server Settings the Security tab Authentication System.
2 In the Authentication System Settings drop-down list box under Authentication
Type, select LDAP as the authentication method, and then click Apply New Settings.
NOTE:
• When the server you are accessing uses the Kerberos authentication, select Kerberos as the
authentication method. To set the information necessary to access the Kerberos server, enter
the information in Kerberos Server under the Security tab. See "Kerberos Server."
3 Click Restart Printer.
Setting LDAP Server
NOTE:
• When SSL/TLS communication is required to access the LDAP server, select the Enable check box
for LDAP-SSL/TLS Communication in SSL/TLS under the Security tab. See "SSL/TLS."