Filter
Top Products
Dell™ Printer Configuration Web Tool |
145
*1
This is available on certain regions.
*2
This setting does not affect fax job.
Network Settings
Specifies the PostScript 3 Compatible communication protocol for the printer.
USB Settings
Specifies USB settings of the printer.
PCL Settings
Specifies the Printer Control Language (PCL) settings.
Output Settings Default Paper Size Sets the default print paper size.
Print ID Sets where to print the user ID on the output paper.
Print Text Sets whether the printer outputs Page Description
Language (PDL) data which is not supported by the
printer as text when the printer receives it.
Banner Sheet Insert
Position
Sets where to insert a banner sheet in the output.
Banner Sheet Specify
Tray
Sets from which tray a banner sheet is fed.
Substitute Tray Sets whether to use another size paper when the paper
that is loaded in the specified tray does not match the
paper size settings for the current job.
Letterhead 2 Sided Sets whether to print on both sides of letterhead.
A4<>Letter Switch Sets whether to print A4 size jobs on Letter size paper if
A4 is not available in the paper trays and vice versa.
A5<>Statement
Switch
Sets whether to print A5 size jobs on Statement size paper
if A5 is not available in the paper trays and vice versa.
Report 2 Sided Print Sets whether to print reports on both sides a sheet of
paper.
Use Another Tray Sets whether to show a message to select another tray
when the specified paper is not available in the paper tray.
Resume Printing After
Jam Recovery
*2
Sets whether to delete print job after recovering from
paper jam.
Tap To Print Sets whether to add the printer to a mobile device such as
a tablet or a smartphone by tapping the device to the
(NFC) reader.
Network Settings PS Data Format Sets PostScript 3 Compatible communication protocol
for each interface.
USB Settings USB Port Sets whether to enable the USB interface on the printer.
PS Data Format Sets PostScript 3 Compatible communication protocol
for each interface.
Job Time-out Sets the amount of time the printer waits for data to arrive
from the computer.