Filter
Top Products
Dell™ Printer Configuration Web Tool |
151
Fax Settings
Configures the fax settings.
NOTE:
• You cannot set up the items on the Fax Settings page unless you set up the country code under
Country.
• Duplex print may not be done depending on the size of the received faxes or settings of the trays,
etc.
Fax Defaults Resolution Standard Suitable for documents with normal sized
characters.
Fine Suitable for documents containing small
characters or thin lines or documents printed
using a dot-matrix printer.
Super Fine Suitable for documents containing extremely
fine detail. The super fine mode is enabled only
if the remote machine also supports the Super
Fine resolution.
Photo Suitable for documents containing
photographic images.
2 Sided Scanning Sets whether to scan both sides of a document.
Binding of
Original
Sets the binding position for the two-sided
scanning.
Darken/Lighten Sets the default density to fax your documents
lighter or darker.
Delayed Send Sets the fax transmission start time when
sending a fax at a specified time.
Fax Line Settings Fax Number Allows you to enter the fax number of the
printer to be printed on the header of faxes.
Country Sets the country where the printer is used.
Fax Header Name Allows you to enter a name to be printed on the
header of faxes.
Line Type Sets the default line type; Public Switched
Telephone Network (PSTN) or Private Branch
Exchange (PBX).
Line Monitor Sets the volume of the line monitor, which
audibly monitors a transmission through the
internal speaker until a connection is made.
DRPD Pattern Sets the Distinctive Ring Pattern Detection
(DRPD) setting from Pattern1 to Pattern7.
DRPD is a service provided by some telephone
companies.