Filter
Top Products
Using the Operator Panel |
81
2 Tap the Tools tab Language Settings Keyboard Layout.
3 Tap the desired keyboard layout, and then tap OK.
Changing the Language
1 Press the (Information) button.
2 Tap the Tools tab Language Settings Panel Language.
3 Tap until the desired language appears, and then tap the desired language.
4 Tap OK.
Panel Lock
The Panel Lock feature allows some system settings to be kept in a locked state with
the password so that unauthorized personnel cannot access to the menu to change the
settings.
NOTE:
• Disabling the operator panel menus does not prevent access to the stored print and Tray
Settings menus.
Enabling the Panel Lock
1 Press the (Information) button.
2 Tap the Tools tab Admin Settings.
3 Tap until Secure Settings appears, and then tap Secure Settings.
4 Tap Panel Lock Panel Lock Control Enable OK.
5 Enter the new password, and then tap OK.
6 Re-enter the password, and then tap OK.
CAUTION:
• Make sure not to forget the password. If you forget the password, the following procedure
allows you to reset the password. However, the settings for the address book and phone
book will be reset as well.
1 Turn off the printer.
2 While holding the (Information) button, turn on the printer.
Changing the Panel Lock Password
NOTE:
• You can change the password only when Panel Lock is set to Enable.
1 Press the (Information) button.
2 Tap the Tools tab Admin Settings.
3 Enter the password.
4 Tap until Secure Settings appears, and then tap Secure Settings.
5 Tap Panel Lock Change Password.
6 Enter the current password, and then tap OK.