Filter
Top Products
152
| Dell™ Printer Configuration Web Tool
Incoming
Defaults
Receive Mode Telephone Automatic fax reception is turned off. You can
receive a fax by picking up the handset of the
external telephone and then pressing a remote
receive code, or by tapping Receive in On
Hook and then tapping Receive. For details,
see "Receiving a Fax Manually."
Fax Automatically receives faxes.
Telephone/Fax When the printer receives an incoming fax, the
external telephone rings for the time specified
in Auto Receive Tel/Fax, and then the printer
receives a fax. If an incoming call is not a fax, the
printer beeps from the internal speaker
indicating that the call is a telephone call.
Ans Machine/Fax The printer can share a telephone line with an
answering machine. In this mode, the printer
monitors the fax signal and pick up the line if
there are fax tones. If the telephone
communication in your country is serial, this
mode is not supported.
DRPD Before using the Distinctive Ring Pattern
Detection (DRPD) option, a distinctive ring
service must be installed on your telephone line
by the telephone company. After the telephone
company has provided a separate number for
faxing with a distinctive ring pattern, configure
the fax setup to monitor for that specific ring
pattern.
Ring Tone
Volume
Sets the volume of the ring tone, which
indicates that an incoming call is a telephone
call through the internal speaker when Receive
Mode is set to Telephone/Fax.
Auto Receive Fax Sets the interval at which the printer goes into
the fax receive mode after answering an
incoming call.
Auto Receive
Tel/Fax
Sets the interval at which the printer goes into
the fax receive mode after the external
telephone receives an incoming call.
Auto Receive
Answer/Fax
Sets the interval at which the printer goes into
the fax receive mode after the external
answering machine receives an incoming call.
Junk Fax Setup Sets whether to reject unwanted faxes by
accepting only the faxes from the numbers
registered in the phone book.
2 Sided Printing Sets whether to print on both sides of a sheet of
paper.
Remote Receive Sets whether to receive a fax by pressing a
remote receive code on the external telephone.
Remote Receive
Tone
Sets a 2-digit remote receive code when
Remote Receive is On.
Discard Size Sets whether to delete text or images at the
bottom of a fax page when the entire page does
not fit onto the output paper. Selecting Auto
Reduction automatically reduces the fax page
to fit it onto the output paper, and does not
discard any images or text at the bottom of the
page.