Filter
Top Products
Loading Paper Manually
5. For printing on labels, envelopes, transparencies, and heavy
paper, install the optional face-up output tray. Set the paper
path selector on the back of the printer to the face-up position.
6.
Press the MANUAL button. An M appears on the right side of
the display, as shown below.
7.
Make sure the ON LINE light is on; you can then send data to
the printer from your computer.
8. To return to automatic loading, press the MANUAL button
again.
Note: The manual feed selection is an attribute of the channel
you are using. This means you can use the panel to select
manual feed for each channel separately; the setting remains,
even if the printer mode for that channel is switched. Also, this
selection can not be canceled by printer command but only by
the panel.
4-10
Paper Handling