Filter
Top Products
Decline in Print Quality
A black page is printed.
l The imaging cartridge may need to be replaced. Replace it as
described in Chapter 5.
The printed image is light or faint.
The print density knob may not be set correctly. Adjust the
knob by turning it clockwise.
If the TONER LOW warning appears, replace the imaging
cartridge as described in Chapter 5.
The transfer charger wire may be dirty. Clean the wire as
described in Chapter 5.
Your paper may be moist or damp. The higher the moisture
content in the paper, the lighter the printed output. Do not
store your paper in a humid or damp environment.
If the problem persists, replace the imaging cartridge as
described in Chapter 5.
The printed image is too dark.
l The print density knob may not be set correctly. Adjust the
knob by turning it counterclockwise.
l If the problem persists, replace the imaging cartridge as
described in Chapter 5.
The non-printed side of the page is dirty.
l Toner may have spilled in the paper feed path. Clean the inside
of the printer as described in Chapter 5.
Troubleshooting
6-37