Filter
Top Products
Level 2 Options
l AUTOFEED — When you set AUTOFEED to OFF, the
printer ignores the AUTOFEED signal on pin 14 and does not
send an automatic line feed (LF) command with each carriage
return (CR). When you set AUTOFEED to ON, the printer
adds a line feed to each carriage return it receives. If your text
lines overprint each other, set AUTOFEED to ON.
Menu/submenu
Available options
ON or OFF
l BUSY DELAY — Use BUSY DELAY to set the delay period
from the ACKNLG to the BUSY signal. Available settings are
0, -5, and +5 microseconds plus MIN. The MIN option sets
the ACKNLG signal to high. For most applications, leave this
option set to the factory setting, 0 microseconds.
Menu/submenu
Available options
-5, 0, +5, or MIN
Before you can set options on the SERIAL submenus, you must
choose either RS-232C or RS-422 to match your interface.
Menu/submenu
Available or options
RS232C or RS422
I
SelecType
3-25