Filter
Top Products
Status and Error Messages
This section contains an alphabetical list of status and error
messages that you may encounter and includes likely solutions to
problems.
If an error occurs, the control panel displays an error message that
tells you what is wrong and, in some cases, offers a solution.
Status messages also appear on the display during normal
operation; they indicate the printer’s current status.
Note: In some cases, the red CONTINUE light flashes when an
error is detected. This requires you to correct the problem and
then press the CONTINUE button to clear the error. However, if
the AUTO CONT option in SelecType is set to ON, some errors
may clear automatically even though the problem remains. See
Chapter 3 for details on AUTO CONT.
In this section, status messages are preceded by [S], warning
messages are preceded by [W], and error messages are preceded by
[E]. In some cases the message you see on your display also shows
the printer mode.
[E]
ADD MEMORY FOR CH X
The printer has insufficient memory available in the channel
displayed. You may have changed the printer mode, increased
the RX-BUFFER SIZE setting, or changed the CH
INDIVIDUAL setting. To correct the error, decrease the RX-
BUFFER SIZE setting or change the CH INDIVIDUAL setting
in SelecType. Changing the CH setting from INDIVIDUAL to
AUTOSENSE may solve this problem. If necessary, add
memory to your printer,
6-2
Troubleshooting