Filter
Top Products
Level 1 Options
l T-OFFSET — You can use the T-OFFSET (top offset)
option to make fine adjustments in the position of the printing
on the page. The setting is in dots; each dot is 1/300th of an
inch (0.0846 mm), so you can use this option to raise or lower
the printing on the page approximately 1/5th of an inch (5
mm). The factory setting is 0.
Menu/submenu
Available options
-64 to +63
l L-OFFSET — You can use the L-OFFSET (left offset) option
to make fine adjustments in the position of the printing on the
page. The setting is in dots; each dot is 1/300th of an inch
(0.0846 mm). With this option, you can move the printing on
the page approximately 1/5th of an inch to the left (settings
from -1 to -64) or to the right (settings from 1 to i-63). The
factory setting is 0.
Menu/submenu
Available options
-64 to +63
l MEMORY LEFT — Use this option to display the amount of
memory available. You can use this information to see whether
a newly-installed memory option is working correctly or to see
how much memory is available for fonts or complex graphics.
SelecType
3-19