Filter
Top Products
Level 1 Options
This section lists all the menus and options available when you use
SelecType Level 1. Most menus and options are the same in the
different printer modes. However, some have a different function
for each mode. These menus are listed in the Appendix that
describes the printer mode. See the Quick Reference Card at the
back of this manual for a map of all SelecType menus and options.
When you enter SelecType Level 1, you see one of these options:
Note: If you have set the CH option in Level 2 to INDIVIDUAL,
the SelecType display shows CANCEL: S: I’: 0: whenever you
enter Level 1. To select a channel, press the arrow that
corresponds to the channel you plan to use. After you select the
channel, one of the main menu options listed above appears on
the display.
If you are using AUTOSENSE mode, remember the channel (S, P,
or O) displayed before you enter SelecType. All Level 1 settings
are stored in that channel. If you want to save the settings
permanently, store them in a macro and choose that macro as the
poweron macro. See pages 3-20 and 3-21.
SelecType
3-13