Filter
Top Products
Level 2 Options
This section lists all the menus and options available when you use
SelecType Level 2. When you enter SelecType Level 2, you see one
of these options:
TEST PRINT
MODE ASSIGN
I/F CONFIG
RX-BUFFER SIZE
CH
TIMEOUT
CH TIMEOUT
AUTO CONT
BEEPER
P-CONFIG SAVE
FACTORY RESET
VERSION
PAGE COUNTER
RITech
STANDBY
TEST PRINT
You can use this option to print two different test patterns to
check whether your printer is working correctly. After TEST
PRINT appears, press once to see the following display:
Menu/submenu
Available options
1 to 2
Press to print pattern 1 (vertical lines). To print pattern 2
(horizontal lines), press then press . See Chapter 2 for
details on running a test print.
3-22 SelecType