Filter
Top Products
Printing Problems
The position of the printout is not what you expect.
The printed page length differs from the actual length of the
paper.
l The page length setting in your application program may be
incorrect. Make sure that you have set it for the type of paper
you are using. You can also change the page length with the
SelecType SUB CONFIG option as described in Chapter 3, but
keep in mind that your software overrides SelecType settings in
most cases.
The right or left margin setting does not match the actual width of
the paper.
l The margin settings of your software program may not be
correct. Change the settings of your application program.
If this does not correct the problem, you can change the right
and left margins with SelecType. The procedure for changing
margin settings varies depending on the selected operating
mode. See Chapter 3.
Even after changing the page length or margin positions, you find
that the printed position is not correct.
l You may need to set the absolute printing position with the
T-OFFSET or L-OFFSET option in the SYSTEM CONFIG
menu of SelecType Level 1. This feature allows you to adjust
the position of the printable area on the page. See Chapter 3
for more information on using this feature.
6-26
Troubleshooting