Filter
Top Products
The Control Panel
Indicator lights
LEVEL 1, LEVEL 2 One of these lights is on when the printer is in
the SelecType mode, depending on which level
you enter. These lights are off if the printer is not
in the SelecType mode. See Chapter 3 for more
information on SelecType.
CONTINUE
FEED
MANUAL
ON LINE
Flashes when an error is detected or a maintenance
procedure must be performed. At the same time,
an error or maintenance message appears on the
display.
On when data is received and stored in the
printer’s buffer but not yet printed. Rapid flashing
indicates the printer is receiving data from the
computer. If the light flashes slowly, the printer is
receiving data through an interface other than the
default interface in AUTOSENSE mode.
On when the printer is set to feed paper manually
only. When this light is off, the printer feeds the
paper from the cassette.
On when the printer is on line, indicating the
printer can receive and print data. When the
printer is off line, this light is off. The light
flashes as the system switches between on-line
and off-line status.
Testing and Connecting Your Printer
2-3