Filter
Top Products
The Lower Paper Cassette Unit
The optional lower paper cassette unit is an automatic sheet feeder
that fits directly beneath the printer. It houses the adjustable paper
cassette, which holds up to 250 sheets of paper to supplement the
standard paper cassette’s 250-sheet capacity.
With the optional cassette installed, you can load two different
sizes of paper in your printer at once: one in the lower cassette and
the other in the standard cassette. You can also use the SelecType
INPUT AUTO setting to use both cassettes and print up to 500
sheets of the same size paper.
Installing the lower paper cassette unit
If you purchased your printer and lower paper cassette unit at the
same time, first set up your printer by following the instructions in
Chapter 1 and then run a print test (described in Chapter 2). Then,
when you are sure the printer is working properly, install the
optional cassette unit.
1. Turn off the printer.
2. Unplug the printer’s power cord from the electrical outlet and
from the printer. Also unplug the interface cable.
3.
Remove the face-up tray, if it is installed, by lifting it up
slightly and pulling it out.
4.
Move the printer and place the lower paper cassette in the
location where you will operate your printer.
Options
7-13