Filter
Top Products
Selec Type Options
After you select the font source, press or until the
display shows the font number you want; then press to
select the font. If the font you select is a scalable font, you must
perform an additional step as follows.
If you selected a proportional font, press or to select
the font’s point size. Then press once to set.
Menu/submenu
Available options
4.00 to 999.75
(in steps of 0.25)
If you selected a fixed pitch font, press or to select the
spacing in characters per inch. Then press once to set.
Menu/submenu
Available options
0.44 to 99.99
(in steps of 0.01)
You can select fonts that match the current orientation setting
only. If you change the SYMSET or ORIENT settings, the available
font numbers may change. To save the selected font as the default
font, use the SAVE MACRO option in the Level 1 SYSTEM
CONFIG menu.
SUB CONFIG
In HP emulation mode, the SUB CONFIG option includes two
submenus.
Menu/submenu
Available options
I
FORM
SYMSET
FORM
- Use the FORM option to set the number for the
selected paper size and orientation. The setting you choose also
changes the line spacing. This setting is affected by the PAGE
SIZE, ORIENT, and FONT settings. If you select 0, the line
spacing changes to l/6-inch.
B-10 Appendix B