Filter
Top Products
Level 2 Options
I/F CONFIG
Use this option to configure a printer interface. The settings are
parallel for channel P and serial for channel S. This option is not
available for channel O.
Menu/submenu
Available options
P (Parallel)
S (Serial)
The PARALLEL option has these three submenus:
Menu/submenu
Available options
SLCTIN
AUTOFEED
BUSY DELAY
Normally, you do not need to change these settings. Change them
only when you have special requirements.
l SLCTIN — When you set SLCTIN to OFF, the printer is
continuously selected and ignores device control codes DC1
and DC3. In almost all cases, leave SLCTIN set to OFF. When
SLCTIN is ON, the SLCTIN signal goes HIGH at power-on
and the control codes DC1 and DC3 are valid.
Menu/submenu
Available options
ON or OFF
3-24
SelecType