Filter
Top Products
Options
After installing additional memory (memory chip set or a
memory expansion board), the printer does not function as
expected
After you turn on the power, the RAM Check message does not
display the expected amount of memory.
•
The RAM chips or the optional memory board may not be
installed correctly. Turn off the printer and check the
installation. Make sure that the chips are installed in the
correct sector of the main board and that each chip is firmly
seated in its socket. Also make sure that the notches on the
chips are all pointing in the correct direction. See Chapter 7 for
detailed instructions.
•
If you are using the memory board
(C82206*),
you may not
have set the DIP switches correctly. See Chapter 7 for
instructions on installing the memory board.
Complex pages still cannot be printed and the INSUFF MEMORY
message appears on the display.
l The SelecType FULL PRINT, RX-BUFFER SIZE, or
INDIVIDUAL setting may need to be changed. See Chapter 3
for more information.
l You may not have installed enough memory. You can add up
to
6.5
MB of memory for a total of
7.5
MB. See Chapter
7
for
instructions on increasing the printer’s memory. If you have
added all of the extra memory possible and the error message
continues to appear, you may have to simplify the document
you are trying to print.
6-40
Troubleshooting