Filter
Top Products
Default Settings
When your printer is initialized, the settings for the HP emulation
mode are reset to the values shown in the table below.
Item
Factory Reset
Paper input
Standard paper cassette
Paper size Letter (US) or (A4) other
Orientation
Portrait
Copy count
1
Page length
64 (US) or 70 (other) lines
Reset
SelecType setting
SelecType setting
SelecType setting
SelecType settrng
Depends on the paper size
and orientation settings
VMI
8/48 inch (6 lines per inch)
Page length minus 1 dtvided
by text lengih. Values are
fixed and depend on the
SelecType paper size setting.
The page length and text
length are measured in
Inches.
HMI
12/120 Inch (IO cpi)
HMI of the selected font
Top margin
l/2 inch (150 dots)
1/2 Inch (150 dots) when
SelecType OFFSET is 0
Text lines
60 (US) or 64 (other) lines
SelecType setting
Text length 60 (US) or 64 (other) lines
SelecType setting
Portrait
Left margin
logical page left margln
logical page left margin
Right margin
logical page right margin
logical page right margin
Line
CR=CR, LF=LF, FF=FF
CR=CR, LF=LF, FF=FF
termination
B-30
Appendix B