Filter
Top Products
SelecType Overview
Level 2 functions
Prints two test patterns to check the printer’s
operation.
Chooses one of the emulation modes: HP
LaserJet III, Epson LQ, Epson FX, or IES modes.
In the IES modes, the printer switches
automatically between PostScript and another
mode (if PostScript is available). With an
optional identity card, you can also select Epson
GL or PostScript emulation.
Configures the parallel and serial interfaces.
: Chooses the size of the receive buffer.
Selects the AUTOSENSE or INDIVIDUAL
mode and assigns memory for INDIVIDUAL.
Defines the auto emulation switch timeout; if
no more data is sent during the specified time
period, the printer switches from one emulation
mode to the other.
Defines the channel timeout; if no data is sent
during the specified time period, the printer
switches from one channel to the other.
Selects automatic continue, which permits the
printer to continue printing instead of stopping
after certain error conditions occur.
Turns the beeper on or off.
3-4
SelecType