Filter
Top Products
Testing the Printer
Printing a font sample
In addition to the test print patterns and the status sheet, you can
print a font sample that shows samples of the various fonts
available in the selected printer mode.
1. Press SelecType once to enter SelecType Level 1.
Note: If you have already chosen the INDIVIDUAL mode in
SelecType, and have set up more than one channel, the
following option appears on the display (the display shows
available channels only):
Press any arrow button to choose your channel; then go on to
step
2.
2. Press until FONT SAMPLE appears on the display.
Press twice to print the font sample. The printer takes
several seconds to compose the font sample before it starts
printing. A portion of the printout is shown below.
4. Press SelecType twice to exit SelecType.
2-10
Testing and Connecting Your Printer