Filter
Top Products
[S]
[S]
[E]
[E]
[E]
[S]
[S]
Status and Error Messages
RAM Check X.X MB
The printer is checking the available RAM (X.X = capacity).
READY
The printer is ready to print.
REINSERT CARD
You may have removed an option card while the FEED light
was still lit or while the printer was on line. To correct the
error, make sure the printer is off line. Next, reinsert the card
into the correct slot and press CONTINUE. See Chapter 7 for
more
information on optional cards.
REMOVE CARD
You may have inserted an option card while the printer was
on line or while the FEED light was on. Data still remains in
the printer’s buffer. To correct this error, take the printer off
line. Then remove the card and press CONTINUE. Before you
reinsert the card, make sure that all data in the buffer has
been printed and that the printer is off line. If the FEED light
is on, press FEED to print any remaining data. See Chapter 7
for more information on optional cards.
RESELECT TRAY
The optional lower paper cassette unit is not installed and the
INPUT option is set to OPT or AUTO. Turn off the printer
and install the optional lower paper cassette unit. If you
decide not to use the optional paper cassette unit, press
CONTINUE to select paper automatically from the standard
paper cassette. After printing, change the INPUT option to
STD.
RESET
The printer has been reset to the macro specified with the
SelecType LOAD MACRO option.
ROM Check
The printer is checking ROM.
6-6
Troubleshooting