Filter
Top Products
Testing the Printer
Follow these steps to print the status sheet:
1. Press SelecType once to enter SelecType Level 1.
Note: If you have already chosen the INDIVIDUAL mode in
SelecType and have set up more than one channel, the following
option appears on the display (The display shows available
channels only):
Press any arrow button to choose your channel; then go on to
step 2.
2. Press until STATUS SHEET appears on the display.
3. Press twice to print the status sheet.
4. Press the SelecType button twice to exit SelecType.
A portion of the status sheet printout is shown below.
Printer Configuration
STATUS
SHEET
EPSON
Installed Memory : 4.5Mbytes
Controller Version : 21.04
Memory Share
: AUTOSENSE
CH Time out
: 60
Auto Continue
: OFF
Total Printed Count: 552216
standby
: DISABLE
:ON
Form Length
: 64
Symbol set
: Roman-8
System Configuration
Top Offset
: 0
Full Print
: 0
Load Macro
: 0
Left Offset
: 0
Memory Left
: 4110Kbytes
Power On Macro : 0
Testing and Connecting Your Printer
2-9