Filter
Top Products
3-19
Fiber Matrix 6400 Switcher • Operation
Example 5: Grouping inputs and outputs
In the following example, several switcher inputs and outputs are assigned to
groups. The steps show the front panel indications that result from your action.
1. Clear all selections: Press and release the Esc button.
C O N T R O L
PRESET
ENTER
ESCVIEW
Press the Esc button to clear all selections.
The button flashes once.
2. Select I/O Group mode: Press and hold the Input 1 and Output 1 buttons for
approximately 2 seconds and then release the buttons.
1
1
17 18 19
1 2 3
17 18 19
1 2 3
Press and hold the Input 1 button and Output 1 button.
Release the Input 1 button
and Output 1 button.
Ungrouped input and
output buttons light.
2 seconds
3. Select an I/O group: Press and release the Enter button to select group 1.
C O N T R O L
PRESET
ENTER
ESCVIEW
Press and release the Enter button to select group 1.
The button lights amber to indicate the selection.
1324Group #