Filter
Top Products
Fiber Matrix 6400 Switcher • Matrix Software
5-2
Matrix Software
Matrix Switchers Control Program
The Windows-based Extron Matrix Switchers Control Program communicates with
the switcher via the Ethernet LAN port or either serial port to provide an easy way
to set up ties and sets of ties. The program is compatible with Windows 2000 and
Windows XP. Updates to these programs can be downloaded from the Extron Web
site (www.extron.com).
Installing the software
The program is contained on the Extron Software Products CD-ROM. Install the
software as follows:
N
For full functionality, install both of the following programs:
• TheMatrixSwitchersControlProgram
• TheFirmwareLoader
1. Insert the CD-ROM into the drive. The installation program should start
automatically. If it does not self-start, run Launch.exe from the CD.
The Extron software CD window appears (figure 5-1).
Figure 5-1 — Software CD window
2. Click the Software tab (figure 5-1).
3. Scroll to the desired program and click Install (figure 5-2).
Figure 5-2 — Software installation