Filter
Top Products
4-9
Fiber Matrix 6400 Switcher • Programmer’s Guide
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Create ties
N
•Commandscanbeenteredback-to-backinastring,withnospaces.Forexample:1*1!02*02&003*003%4*8$.
•
The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
•
The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1, 02*02, or 001*001).
•
The ! tie command, & tie command, and % tie command can be used interchangeably.
•
The ! tie all command, & tie all command, and % tie all command can be used interchangeably.
Tie input
X@ to output X# X@
*
X#
! Out
X#•
In
X@•
All
]
Tie input
X@
to output
X#
.
Example:
1*3!
Out03
•
In01
•
All
]
Tie input 1 to output 3.
Tie input
X@ to output X# X@
*
X#
& Out
X#•
In
X@•
RGB
]
Example (see Note, above):
10*4&
Out04
•
In10
•
RGB
]
Tie input 10 to output 4.
Tie input
X@ to output X# X@
*
X#
% Out
X#•
In
X@•
Vid
]
Example (see Note, above):
7*5%
Out05
•
In07
•
Vid
]
Tie input 7 to output 5.
Quick multiple tie
E
+Q
X@
*
X#
!...
X@
*
X#
!
}
Qik
]
Example:
E
+Q3*4!3*5%3*6!
}
Qik
]
Tie input 3 to output 4,
tie input 3 to output 5, and
tie input 3 to output 6.
Tie input to all outputs
X@
*! In
X@•
All
]
Example:
5*!
In05
•
All
]
Tie input 5 to all outputs.
Tie input to all outputs
X@
*& In
X@•
RGB
]
Example (see Note, above):
8*&
In08
•
RGB
]
Tie input 8 to all outputs.
Tie input to all outputs
X@
*% In
X@•
Vid
]
Example (see Note, above):
10*%
In10
•
Vid
]
Tie input 10 to all outputs.
Read ties
N
The!read tiecommandand&read tiecommandforRGBandthe%read tie command for video can be used
interchangeably.
Read RGB
output tie
X#
!
X@]
Input
X@
is tied to output
X#
.
Read RGB
output tie
X#
&
X@]
Input
X@
is tied to output
X#
.
Read video
output tie
X#
%
X@]
Input
X@
is tied to output
X#
.
Channel mute commands
Channel mute
X#
*1B Vmt
X#
*1
]
Mute output
X#
(no signal is output, but the
light output remains active).
Channel unmute
X#
*0B Vmt
X#
*0
]
Unmute output
X#
(signal is output).
Read channel mute
X#
B
X$]
1 = mute on, 0 = mute off.
Global channel mute 1*B
Vmt1
]
Mute all output channels.
Global channel unmute 0*B
Vmt0
]
Unmute all output channels.
Command/response table for SIS
™
commands
N
X@
= Input number
00
–
64 (00 = untied)
X#
= Output number 01 – 64
X$
= Mute 0 = off (unmuted)
1 = on (muted)