Filter
Top Products
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Color (available for PAL and NTSC only)
Set a specific value
X8% C Col X8% ] Set color level to X8%.
Increment up +C
Col X8% ]
Increment color level.
Increment down – C
Col X8% ]
Decrement color level.
View C
X8% ]
View current setting.
Tint (available for NTSC composite and S-video only)
Set a specific value
X8% T Tin X8% ] Set tint level to X8%.
Increment up + T
Tin X8% ]
Increment tint level.
Increment down – T
Tin X8% ]
Decrement tint level.
View T
X8% ]
View current setting.
Contrast
Set a specific value
X8% ^ Con X8% ] Set contrast level to X8%.
Increment up + ^
Con X8% ]
Increment contrast level.
Increment down – ^
Con X8% ]
Decrement contrast level.
View ^
X8% ]
View current setting.
Brightness
Set a specific value
X8% Y Brt X8% ] Set brightness level to X8%.
Increment up + Y
Brt X8% ]
Increment brightness level.
Increment down – Y
Brt X8% ]
Decrement brightness level.
View Y
X8% ]
View current setting.
Detail lter
Set detail level
X8% D Shp X8% ] Specify the detail (sharpness) level to X8%.
Increment up + D
Shp X8% ]
Increase the detail level.
Increment down – D
Shp X8% ]
Decrease the detail level.
View detail value D
X8% ]
Show the detail setting.
Horizontal shift
Specific value
X8^H Hph X8^ ] Set horizontal centering to X8^.
Increment up + H
Hph X8^ ]
Shift window right.
Increment down – H
Hph X8^ ]
Shift window left.
View H
X8^ ] View the horizontal centering value X8^.
Vertical shift
Specific value
X8^ / Vph X8^ ] Set vertical centering to X8^.
Increment up + /
Vph X8^ ]
Shift window down.
Increment down – /
Vph X8^ ]
Shift window up.
View /
X8^ ] View the vertical centering value X8^.
NOTE: X8% = Picture adjustment: 0 to 127
X8^ = H and V position Values depend on current output rate
DVS 304 Series • SIS Communication and Control 39