Filter
Top Products
Signal Processing
Products Control
Program
The Extron Signal Processing Products Control Program (SPPCP) offers another way to
control the DVS 304 via RS-232 or Ethernet connection in addition to the SIS commands.
This section describes SPPCP installation, communication, and control. Topics that are
covered, include:
• Installing the Software
• Starting the SPPCP
• Using the SPPCP
The program’s graphical interface includes the same functions as those on the scaler’s
front panel with additional features that are only available through the software.
The control software is compatible with Windows 98, Windows NT, Windows 2000, and
Windows XP. The Signal Processing Products Control Program is included on the Extron
DVD, and updates can be downloaded from the Extron Web site (http://www.extron.com).
NOTE: The control program require approximately 32 MB of hard disk space.
Installing the Software
The SPPCP software can be installed onto the hard drive of a connected PC either directly
from the supplied DVD, or downloaded from the Extron Web site.
Installation from the DVD
1. Insert the DVD into the applicable drive. The DVD self starts.
NOTE: The DVD starts only if you have a DVD drive on your PC.
The Extron software window appears.
2. If the disc does not start automatically, run LAUNCH.EXE from the disc.
DVS 304 Series • SPPCP 54