Filter
Top Products
Command ASCII (Telnet)
(host to processor)
URL Encoded (Web)
(host to processor)
Response
(processor to host)
Additional description
Set Direct Access port map
24
E{port #}MD}
W{port #}MD
|
Pmd{port #}]
Reset Direct Access port map
24
E2001MD}
W2001MD
|
Pmt02001]
Disable Direct Access port map
24
E0MD}
W0MD
|
Pmd00000]
Read Direct Access port map
24
EMD}
WMD
|
{port #}]
Listing connections
Get connection listing
E CC } WCC
|
(See below.)
Remote client IP address: port number, time/date when connection was made, total connection time ]
Remote client IP address: port number, time/date when connection was made, total connection time ]
Remote client IP address: port number, time/date when connection was made, total connection time ]
...
Total clients • connections available ]]
Unit Web responses: HTML sample code
var connections = new Array ();
connections [1] = ‘Client IP1, timedate 1, uptime 1’;
connections [2] = ‘Client IP2, timedate 2, uptime 2’;
connections [3] = ‘Client IP3, timedate 3, uptime 3’;
...
connections [n] = ‘Client IPn, timedate n, uptime n’;
connections [n + 1] = ‘total clients, connections available’;
NOTE: X2@ = Verbose/Response Mode (Default = 0 for Telnet connections; 1 for RS-232 host control). 0 = clear/none, 1 = verbose mode, 2 = tagged responses for queries, 3 = verbose mode
and tagged responses for queries. If tagged responses is enabled, all read commands will return the constant string + the data, like setting the value does (for example command: Esc CN
} response: Ipn• x12]).
X5@ = Connection’s security level: 0 = anonymous, 1 – 10=extended security levels 1 thru 10, 11 = user, 12 = administrator.
DVS 304 Series • SIS Communication and Control 51