Filter
Top Products
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Horizontal size
Specific value
X8& : Hsz X8& ] Set horizontal sizing to X8&.
Increase size +:
Hsz X8& ]
Widen the window.
Decrease size –:
Hsz X8& ]
Make the window narrower.
View :
X8& ] View horizontal sizing value X8&.
Vertical size
Specific value
X8& ; Vsz X8& ] Set vertical sizing to X8&.
Increase size +;
Vsz X8& ]
Make the window taller.
Decrease size –;
Vsz X8& ]
Make the window shorter.
View ;
X8& ] View vertical sizing value X8&.
Zoom mode
Zoom in +{
Zom X8* ]
Zoom in, make the window larger.
Zoom out –{
Zom X8* ]
Zoom out, make the window smaller.
Set zoom value
X8* { Zom X8* ]
Set zoom percentage from 100 (default) to 200%.
View {
X8* ]
View zoom percentage.
Pan
Right +1#
HpnX8(]
Left –1#
HpnX8(]
Up –2#
VpnX8(]
Down +2#
VpnX8(]
Output scaler rate
Set output rate
X9!* X9@ = RteX9!*X9@]
Select output resolution and refresh rate.
View output rate =
X9!*X9@]
Show selected output rate.
Output sync format
Set format
6* X9$ # SynX9$]
Set current output sync format setting.
View format 6#
X9$!]
View currently set output sync format.
Set polarity
7* X9# # PolX9#]
Set current sync polarity setting.
View polarity 7#
X9#!]
View current sync polarity setting.
NOTE: X8& = H and V size Values depend on current output rate
X8* = Zoom 100 to 200%
X8( = Pan (Values depend on current output rate and zoom %)
X9! = Output resolution 1 to 25 for resolutions 640 x 480 to 1920 x 1200 (see page 35)
X9@ = Output refresh rate 1 to 7 for rates 24 Hz to 120 Hz (see page 35)
X9# = Output polarity 0 = H - / V -, 1 = H - / V +, 2 = H + / V -, 3 = H+/ V +
X9$ = Output sync format 0 = RGBHV (default), 1 = RGBS, 2 = RGsB, 3 = Y, R-Y, B-Y
DVS 304 Series • SIS Communication and Control 40